RYDE™ 2024+ for Street Glide (Acrylic)
We redesigned our Ryde™ windshield to match the new styling while maintaining exceptional wind protection and a comfortable ride. Our acrylic Ryde™ windshields eliminate buffeting as well as the associated neck pain that can come with it. Also, with less wind noise, you may have a quieter ride and even an improved music listening experience! Our windshields are DOT approved.
Stand-offs, cover plates, and hardware are included with the windshield.
LRS Recurve Windshields are made from the highest optical grade acrylic and polycarbonate materials, allowing for a crystal clear look not only on the bike but for rider's view as well. Our Acrylic Is extremely clear, durable, hard and sexy!
Specs:
- Width: 22"
- Thickness: (.135")
- Material - Impact Modified Acrylic
- Recurve: Yes
- Tints: Light, Medium, Dark
- Sizes: 8", 9", 10.5"
Fitment:
- FITMENT: 2023.5-2024+ Harley-Davidson CVO Street Glide (FLHXSE), 2024 Harley-Davidson Street Glide (FLHX)
Remember: LRS Recurve Windshields are made to be looked over, not though.
Install:
- Remove the factory shield using T25 Torx bit
- Remove the factory risers from the fairing using T25 Torx bit. (You must remove the bolts then pull off the cover of the fairing and unscrew the risers from the back)
- Replace the factory risers with LRS risers secured with factory hardware. The risers will only fit in one direction. There are little notches in the fairing that fit with the risers to help guide it into place.
- Place the LRS shield on the fairing
- Place the cover plate and secure one side at a time. Hand start the threads then torque to hand tight using a 3mm Allen Key/Wrench.
Download the install guide here
*All Windshields are designed and made by Long Ride Shields out of Sparks Nevada, USA.*
All measurements are approximate. These may differ depending on material shrinkage when formed.
You can find our measuring guide here LRS Measuring Guide